Battle Steel BOLT Carbon Killer & Lug Scraper w/Pick & Brush Set
- Battle Steel
- 0.20 LBS
Bulk discount rates
Below are the available bulk discount rates for each individual item when you purchase a certain amount
|Buy 2 or above||and pay only $34.98 each|
- Bolt, Bolt Carrier & Firing Pin Scraper
- Lug Scraper, precisely mates with the locking lugs inside the barrel extension.
- Delrin extension handle and storage conpartment
- A2 Tool Steel, Hardened to 50 HRC
- Machined on a 7 axis state of the art CNC equipment
- Only 2oz (4oz in Delrin Housing)
- Patent Pending
- 100% Made In USA
WARNING This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov. (California law requires this warning to be given to customers in the State of California.)
Made In USA
I bought this a while back. Used it a few times so far. The only change I made, I took a small magnet and glued it into main body to hold the cleaner part in while I clean the lugs. It seemed to want to stay in the gun and pull out of the tool handle. The magnet gives it a little holding power. The way I did it, I stuck the magnet on the metal tool that goes into the handle, put some super glue on the magnet, held it upright and then slid the handle down over the cleaning tool. The glue stuck to the handle part and a few hours later, I removed the cleaning tool. The magnet has been there ever since. I got the magnet at Harbor Freight.
This is a really nice compact tool for all that it does. I'm very happy with it, even if I had to add a magnet to it. It's very usable without the magnet but it makes it easier with it. Highly recommended.
Great Tool, Very well thought out
Outstanding piece of equipment
Nice addition to the range bag