Loading... Please wait...
General Question Form - Find Answers To All Yours Questions Request For Quote


Manufacturers

HOT Deals

New Products

Featured Products

Package Deals

Auctions

Clearance

Affiliate Program

Sitemap

RSS Feeds

Gift Certificates

Sort by:

AR15/M4 Triggers

  • CMC 91501 Single Stage Drop-In Curved Trigger w/3.5lbs Pull
    $154.95

  • CMC 91503 Single Stage Drop-In Flat Trigger w/3.5lbs Pull
    $154.95

  • CMC 91505 Large Pin Single Stage Drop-In Curved Trigger w/3.5lbs Pull
    $154.95

  • CMC 91505 Large Pin Single Stage Drop-In Flat Trigger w/3.5lbs Pull
    $154.95

  • Fully adjustable trigger gives a smooth, two-stage pull with a precise “icicle sharp” break and ultra-fast lock time to minimize accuracy loss caused by gun movement during trigger pull. Set first stage pull weight by bending the legs of the trigger spring; set second-stage weight within a pre-set range by turning its adjustment screw. Another screw on the trigger lets you adjust overtravel for clean, crisp letoff. Lightweight hammer provides a 50% reduction in lock time over factory hammer, yet uses standard weight hammer spring to ensure sufficient energy transfer for reliable primer ignition, even on AR-style .308 weapons. Trigger shoe is positioned 1/8" farther forward than factory shoe for comfortable finger position during the squeeze. All contact surfaces are wire EDM cut to exact dimensions for full, precise engagement free of unwanted play. Available to fit both large (.169") and small (.154") pin receivers; small pin models include spare hammer pin to aid in proper fit on receivers with slightly oversized holes. Service model provides nominal 4½ lb. pull weight required for NRA High Power Service Rifle competition and is also approved for CMP-sanctioned competitions. Most of the pull weight is loaded on the first stage, followed by a quick, clean second-stage break. First stage, 3.2 to 5 lb.; second stage, ½ to 1½ lb. Match model allows a very low combined pull weight for superb trigger control on highly modified raceguns used in unlimited NRA High Power Rifle competition. Helps you shave those extra hundredths of an inch from your groups for a competitive edge. First stage, 1.3 to 3 lbs.; second stage, 4 oz. to 14 oz. Designated Marksman Rifle (DMR) model combines the light first stage of the Match trigger with the heavier Service second stage to reduce risk of premature release in high stress situations. Perfect for precision tactical and competitive shooting where trigger pull is not regulated. Allows a high rate of semi-auto fire; an experienced shooter can fire 30 rounds in as little as 4½ seconds. First stage, 1.3 to 3 lbs.; second stage, ½ to 1½ lbs.
    $279.00

  • Fully adjustable trigger gives a smooth, two-stage pull with a precise “icicle sharp” break and ultra-fast lock time to minimize accuracy loss caused by gun movement during trigger pull. Set first stage pull weight by bending the legs of the trigger spring; set second-stage weight within a pre-set range by turning its adjustment screw. Another screw on the trigger lets you adjust overtravel for clean, crisp letoff. Lightweight hammer provides a 50% reduction in lock time over factory hammer, yet uses standard weight hammer spring to ensure sufficient energy transfer for reliable primer ignition, even on AR-style .308 weapons. Trigger shoe is positioned 1/8" farther forward than factory shoe for comfortable finger position during the squeeze. All contact surfaces are wire EDM cut to exact dimensions for full, precise engagement free of unwanted play. Available to fit both large (.169") and small (.154") pin receivers; small pin models include spare hammer pin to aid in proper fit on receivers with slightly oversized holes. Service model provides nominal 4½ lb. pull weight required for NRA High Power Service Rifle competition and is also approved for CMP-sanctioned competitions. Most of the pull weight is loaded on the first stage, followed by a quick, clean second-stage break. First stage, 3.2 to 5 lb.; second stage, ½ to 1½ lb. Match model allows a very low combined pull weight for superb trigger control on highly modified raceguns used in unlimited NRA High Power Rifle competition. Helps you shave those extra hundredths of an inch from your groups for a competitive edge. First stage, 1.3 to 3 lbs.; second stage, 4 oz. to 14 oz. Designated Marksman Rifle (DMR) model combines the light first stage of the Match trigger with the heavier Service second stage to reduce risk of premature release in high stress situations. Perfect for precision tactical and competitive shooting where trigger pull is not regulated. Allows a high rate of semi-auto fire; an experienced shooter can fire 30 rounds in as little as 4½ seconds. First stage, 1.3 to 3 lbs.; second stage, ½ to 1½ lbs.
    $330.00

  • Fully adjustable trigger lets you set first stage pull weight. Set your second stage weight within pre-set range. Adjust overtravel on trigger for clean, crisp letoff. Lightweight hammer provides a 50% reduction in lock time over factory hammer. Trigger shoe positioned for comfortable finger position during the squeeze. Available to fit both large (.169) and small (.154) pin receivers; small pin models include spare hammer pin to aid in proper fit on receivers with slightly oversized holes. Designated Marksman Rifle (DMR) model combines a light first stage trigger with the heavier service second stage to reduce risk of premature release in high stress situations. Allows a high rate of semi-auto fire; an experienced shooter can fire 30 rounds in as little as 4½ seconds. Match model allows a very low combined pull weight for superb trigger control on highly modified raceguns used in unlimited NRA High Power Rifle competition.
    $279.00

  • Large pin version of the Geissele Hi-Speed Match Rifle trigger and is designed for NRA High Power Match Rifle competition with highly modified, match-grade AR15-type Colt rifles manufactured from 1990 to 2009. The large pin dimension is 0.169 inches, whereas the standard pin dimension is 0.155 inches. The Match Rifle Trigger’s adjustability, lighter 1st and 2nd stage pull weights, and fast lock time enhances trigger control and accuracy while the full-power hammer spring provides uniform primer ignition for more consistent bullet velocity.
    $330.00

  • The Geissele Hi-Speed Service Rifle trigger is designed for High Power Service Rifle competition. It is an approved trigger for use in NRA and CMP High Power matches including sanctioned competitions such as Excellence In Competition and the National Trophy matches. The Service Rifle trigger’s adjustability and exclusive 5-coil trigger spring allows for a heavier 1st stage pull weight and lighter 2nd stage weight to give outstanding control and precision while still meeting the minimum trigger weight requirement of 4.5 lb.
    $279.00

  • Large pin version of the Geissele Hi-Speed trigger designed for High Power Service Rifle Competition for use in Colt AR type rifles manufactured from 1990 to 2009. The large pin dimension is 0.169 inches, whereas the standard pin dimension is 0.155 inches. It is an approved trigger for use in NRA and CMP High Power matches including sanctioned competitions such as Excellence In Competition and the National Trophy matches. The Service Rifle trigger’s adjustability and exclusive 5-coil trigger spring allows for a heavier 1st stage pull weight and lighter 2nd stage weight to give outstanding control and precision while still meeting the minimum trigger weight requirement of 4.5 lb.
    $330.00

  • The HK MR 556 trigger is similar to our SSA with a 4.5 total pull weight. It can be used in both the HK 556 and semi-auto HK 416's.
    $465.00

  • The HK MR 762 trigger is similar to our SSA with a 4.5 total pull weight. It can be used in both the HK 762 and semi-auto HK 417's.
    $465.00

  • The Super Dynamic (SD)triggers have the same body geometry as the SSA models and feature a flat trigger shoe that reduces perceived pull weight, improves control, and gives excellent tactile feedback. Super Dynamic Combat (SD-C) trigger has a 2.5 lb. first stage and a 2 lb. second stage for a 4.5 lb total pull weight with a sharp, repeatable trigger release. Super Dynamic Enhanced (SD-E) trigger has a combined 3.5 lb. total pull weight, with a 2.3 lb. first stage and a 1.2 lb. second stage. Super Dynamic 3-Gun (SD-3G) single-stage trigger has 3.5 lb. pull weight with a short pull length and short reset - excellent for fast-action competitions.
    $260.00

  • The Super Dynamic (SD)triggers have the same body geometry as the SSA models and feature a flat trigger shoe that reduces perceived pull weight, improves control, and gives excellent tactile feedback. Super Dynamic Combat (SD-C) trigger has a 2.5 lb. first stage and a 2 lb. second stage for a 4.5 lb total pull weight with a sharp, repeatable trigger release. Super Dynamic Enhanced (SD-E) trigger has a combined 3.5 lb. total pull weight, with a 2.3 lb. first stage and a 1.2 lb. second stage. Super Dynamic 3-Gun (SD-3G) single-stage trigger has 3.5 lb. pull weight with a short pull length and short reset - excellent for fast-action competitions.
    $230.00

  • The Super Dynamic (SD)triggers have the same body geometry as the SSA models and feature a flat trigger shoe that reduces perceived pull weight, improves control, and gives excellent tactile feedback. Super Dynamic Combat (SD-C) trigger has a 2.5 lb. first stage and a 2 lb. second stage for a 4.5 lb total pull weight with a sharp, repeatable trigger release. Super Dynamic Enhanced (SD-E) trigger has a combined 3.5 lb. total pull weight, with a 2.3 lb. first stage and a 1.2 lb. second stage. Super Dynamic 3-Gun (SD-3G) single-stage trigger has 3.5 lb. pull weight with a short pull length and short reset - excellent for fast-action competitions.
    $250.00

  • The Geissele Super 3 Gun (S3G) trigger is a semi-automatic-only derivative of the two-stage Super Select-Fire (SSF) combat trigger that Geissele Automatics produces for customers in the U.S. Special Operations Community. The S3G was developed to combine the SSF combat trigger's match-grade semi-automatic performance with its smooth single-stage full-automatic feel to make a fast, smooth, and robust trigger ideal for 3 Gun competition shooting. The new Geissele Super 3 Gun trigger has a super short trigger pull and a short reset so that rounds can be sent downrange as quickly as possible while still maintaining superb accuracy. The SSF's long, smooth pull was shortened and combined with a lightning-quick reset to give it a unique, hybrid trigger pull that is a cross between a traditional two-stage and single-stage trigger while at the same time retaining the safety and robustness of the SSF's two-stage trigger design. The result is an outstanding, well-balanced trigger that is ideal for high-volume, accurate fire. An S3G-equipped rifle enables the shooter to engage targets faster and more accurately than with any other trigger/rifle combination available today. Field tests have shown that expert S3G shooters can routinely and accurately deliver up to twelve shots on an IDPA target at 7 yards in an amazing 1.9 seconds. A description of the S3G pull: 1. The shooter starts pulling the trigger as his sights become aligned on target. 2. At about 3.5 lbs., the trigger starts to move back smoothly, like it's on ball bearings. 3. After the trigger moves a short distance, the weapon discharges. Nothing precedes the discharge: no second stage stop, no grittiness, no stacking of the trigger pull weight as the hammer is cammed down like on a stock AR15 trigger. The trigger finger feels a sensation of walking along a perfectly flat, glassy-smooth plateau that suddenly drops away. 4. After a short overtravel, the trigger is quickly reset when the shooter slightly relaxes his trigger finger and the next shot is ready to be fired without having to go back to the beginning of the trigger pull cycle.
    $250.00

  • This is a semi-automatic-only derivative of the two-stage Super Select-Fire (SSF) combat trigger that Geissele Automatics produces for customers in the U.S. Special Operations Community.The large pin dimension is 0.169 inches, whereas the standard pin dimension is 0.155 inches. The S3G was developed to combine the SSF combat trigger’s match-grade semi-automatic performance with its smooth single-stage full-automatic feel to make a fast, smooth, and robust trigger ideal for 3 Gun competition shooting.
    $290.00

  • The Geissele Super Semi-Automatic (SSA®) trigger is a semi-automatic only version of Geissele Automatics’s Super Select-Fire trigger. The SSA is a 4.5lb. non-adjustable combat trigger that is a precision two-stage trigger and allows precise and accurate trigger control. The SSA’s two-stage design allows the trigger to be light enough for accurate and precise shots, but forgiving enough for CQB. The SSA is safety certified by Crane Naval Surface Warfare Center. It is recommended for demanding applications such as Law Enforcement use, Close Quarters Battle (CQB) and mid-range carbine work.
    $210.00

  • This is a semi-automatic-only version of Geissele Automatics’s Super Select-Fire trigger. The large pin dimension is 0.169 inches, whereas the standard pin dimension is 0.155 inches. The SSA is a non-adjustable combat trigger that performs like a match-grade two-stage trigger and allows precise and accurate trigger control. It is recommended for demanding applications such as Squad Designated Marksman (SDM) rifles, Law Enforcement use, and Close Quarters Battle (CQB) and mid-range carbine work.
    $260.00

  • Built on the chassis of the Geissele SSA, the SSA-E provides enhanced trigger control and weapon accuracy while maintaining the robustness and reliability of our combat-proven two-stage trigger. The SSA-E’s reduced 1st and 2nd stage pull weights result in a trigger with a smooth, light 1st stage take-up and a crisp, candy cane-like 2nd stage break. The SSA-E is ideal for use in precision Squad Designated Marksman type rifles where weapon accuracy and reliability are critical and a non-adjustable drop in trigger is desired.
    $230.00

  • Finely-tuned semi-automatic-only version of our full-auto, two stage combat trigger presently used in the U.S. Special Operations Community. The large pin dimension is 0.169 inches, whereas the standard pin dimension is 0.155 inches. Built on the chassis of the Geissele SSA, the Super Semi-Automatic Enhanced (SSA-E) provides enhanced trigger control and weapon accuracy while maintaining the robustness and reliability of our combat-proven two-stage trigger. The SSA-E’s reduced first and second stage pull weights result in a trigger with a smooth, light first stage take-up and a crisp, candy cane-like second stage break. The SSA-E is ideal for use in precision Squad Designated Marksman type rifles where weapon accuracy and reliability are critical and a non-adjustable drop in trigger is desired.
    $280.00

  • The Geissele Super Select-Fire (SSF) Trigger is a combat trigger that Geissele makes for customers in the U.S. Special Operations community. The SSF is a non-adjustable, true combat trigger, it is not a match trigger. The second stage break is like a carrot rather than an icicle. Suitable for Close Quarters Battle (CQB) and mid-range carbine work, the Geissele SSF is also the perfect trigger for Squad Designated Marksman (SDM) rifles that need automatic fire capability.
    $450.00

  • The Geissele Super Select-Fire (SSF®) Trigger is a select-fire combat trigger that Geissele Automatics developed for the U.S. Special Operations Community. The SSF is a non-adjustable combat style two-stage trigger that is available in 4.5lb. and 5.5lb. configurations. In semi-automatic mode, the SSF is a precision two-stage trigger that allows precise and accurate trigger control. In fully-automatic mode, the SSF is a single-stage trigger with a smooth, continuous trigger pull and abrupt hammer release. The SSF is safety certified by Crane Naval Surface Warfare Center. NSN# 1005-01-618-8104 All NFA rules apply to the sale of the SSF trigger.
    $320.00

  • The Super ACR Trigger by Geissele is a two-stage, semi-auto only, drop-in replacement trigger. The S2S offers a clean and crisp 4-1/2 lb total trigger pull comprised of a 2-1/2 lb first stage followed by a 2 lb second stage. This trigger is constructed of precision investment cast steel and is machined on high-precision CNC equipment then through hardened for high strength and durability. All critical surfaces are machined on ultra-precise CNC EDM equipment to ensure consistently smooth trigger operation. All components are black phosphate coated to provide outstanding corrosion protection. A full-power hammer spring delivers plenty of energy for reliable ignition on all types of ammunition. Installation is easy and installation does not require any modification. The trigger kit comes complete with all parts, springs and installation instructions.
    $260.00

  • The Geissele Super SCAR is designed similarly to the Geissele SSA. The Super SCAR is a 4.5lb. non-adjustable combat trigger that is a precision two-stage trigger and allows precise and accurate trigger control. The Super SCAR is designed to work with the factory FN polymer housing that is supplied with all SCAR16 and SCAR17 rifles. A Select-Fire version of this trigger is also available. The Geissele Super Scar trigger is designed to only fit into the standard polymer trigger housing manufactured by FN. We do not recommend installing the Geissele Super Scar trigger into any aftermarket trigger housing. We have seen dimensional discrepancies and safety interface issues in the aftermarket trigger housing that do not allow our triggers to function properly and can produce an unsafe situation.
    $325.00

  • SUPER TRICON TRIGGER- Gives your AR-15 the same high performance and reliability of the SSA trigger with additional upgrades designed for operation in harsh environments. Trigger shoe is curved at the top and then becomes straight, and has pronounced surface texture with raised ribs for positive, non-slip finger contact in wet, muddy, or snowy conditions. Features a 4½ lb. total pull weight with a 2½ lb. first stage, plus a full-power hammer spring to ensure positive ignition. Stainless steel springs withstand rough use and resist corrosion in wet environments. Non-adjustable sear engagement.
    $235.00

  • The Geissele 2 Stage (G2S) was designed to be a high quality, cost effective option of the SSA. The G2S is a 4.5lb. non-adjustable combat trigger that is a precision two-stage trigger and allows precise and accurate trigger control. The G2S is manufactured from the same tool steel as the SSA. Visually, from the outside of the weapon there is no difference from the SSA and the feel and reliability is the same. The G2S however has a different way of holding the hammer pin in place, there is no laser markings, and the parts are only spot checked for MP.
    $165.00

  • POF LRTAK Drop-In 4.5lb Triggers w/KNS Pins
    $179.95

  • Timney Triggers For AR15/M4 Rifle 661L Skeleton Trigger LARGE Pin
    $279.95

  • Timney Triggers For AR15/M4 Rifle 661S Skeleton Trigger SMALL Pin
    $279.95

  • Timney Triggers For AR15/M4 Rifle 664S Skeleton Trigger SMALL Pin
    $279.95

  • Timney Triggers For AR15/M4 Rifle 665S Skeleton Trigger SMALL Pin
    $279.95

  • Timney Triggers For AR15/M4 Rifle 668S Solid Trigger SMALL Pin
    $219.95

  • Timney Triggers For AR15/M4 Rifle 669L Solid Trigger LARGE Pin
    $219.95

  • Timney Triggers For AR15/M4 Rifle 669S Solid Trigger SMALL Pin
    $219.95

  • Wilson Combat AR15/M4 3-Gun, Semi-Auto Trigger
    $249.95

  • Wilson Combat AR15/M4 Single Stage, 5 - 5 3/4 lb Trigger
    $249.95

  • Wilson Combat AR15/M4 Single Stage, Semi-Auto Trigger
    $249.95

  • Wilson Combat AR15/M4 Two Stage, Match, Semi-Auto Trigger
    $249.95


Join Our Mailing List